Tile Adhesives and Grouts
Vetofill EG455

Water cleanable, chemical resistant, waterproof epoxy tile grout

Uses
Filling tile joints of virtually all types of tiles up to 10 mm
Chemical processing plants and pharmacuitical plants
Industrial Kitchens, food plants and hospitals
Swimming pools and aquariums
Hospitals and clinics
Fast Download
Technical Information
Product Description

Vetofi ll EG455 is a three component epoxy based, water cleanable, chemical resistant and waterproofing tile grout to be used with most types of tiles including ceramic, porcelain, glass mosaic, marble, granite,...etc. The product is composed of 3 components consisting of resin base, hardener and selected fillers.

Advantages
  • Easy to apply single component
  • Fast return to service and reinstatement
  • Excellent mechanical and physical properties
  • High bond strength
  • High chemical resistance
  • Water cleanable
Compiliance Standard
  • ANSI 118.3 , ANSI 108.6 part 1,3 and 4. 
  • BS EN 12004:2010 as RG2AW
  • ISO13007: 2010 as RG2AW
Packaging & Coverage

Vetofill EG455 supplied in 8 Kg kit with Theoretical Yield of 4.5 Liters

Shelf Life & Storage

Original sealed container of Vetofi ll EG455 has a shelf life of 12 months provided it is stored clear of ground in a dry shaded place below 25ºC.

Application Information
Instructions for use

Mixing

To ensure proper mixing, a mechanically powered mixer or heavy duty slow speed drill fitted with a suitable paddle should be used. Stir the base and the hardener individually to disperse any settlement. The entire contents of the base and hardener should be poured into a suitable size container and mixed mechanically for 2 minutes. Add the filler and mix for another 3 minutes, until a uniform color is achieved.

Application

Fill the mixed grout into the joints using rubber trowel or by using hand operated gun and cartridges.  Excess grout should be cleaned with wet sponge. Cleaning shall be imediately after grouting up to 20 minutes at 22Cº, or before the epoxy hardend.

Cleaning

Tools and equipment can be cleaned with water immediately after use. Hardened materials will require removal by mechanical means.

Surface Preparation

Substrate should be sound, clean, free from loose material, grease, laitance, dirt, or any other substance that might impair the quality of bond with the substrate.

Limitation
  • Do not apply/cure at temperature below 12ºC.
  • For heavy traffic areas, it is good practice to back butter the tile back surfaces with the adhesive to ensure 100% coverage.
Additional Information
Health & Sefety

Vetofill EG455 should not come into contact with skin and eyes or be swallowed. Ensure adequate ventilation and avoid inhalation of vapors. Some people are sensitive to resins, hardeners and solvents. Wear suitable protective clothing, gloves, and eye protection. If working in confi ned areas, suitable respiratory protective equipment must be used. The use of barrier creams provide additional skin protection. In case of contact with skin, rinse with plenty of clean water, then cleanse with soap and water. Do not use solvent. In case of contact with eyes, rinse immediately with plenty of clean water and seek medial advice. If swallowed, seek medical attention immediately - Do not induce vomiting. Vetofill EG455is non-flammable.

Important note

Saveto endeavors to ensure that any advice, recommendations, information it may give, is accurate and correct. It cannot accept any liability either directly or indirectly arising from the use of its products, because it has no direct or continuous control over where or how its products are applied, whether or not in accordance with any advice, specification, recommendation or information given by us. Saveto has the right to change any of the specifications mentioned in the Technical data sheets upon its discretion without prior notification.

Hard copies of TDSs are printed once or twice a year, while our technical data sheets are continuously being updated as per R&D improvements and new 3rd party testing; kindly refer to our website for the latest updated TDSs.

 

More Products from this section
Ceramic TILE FIX

Weather resistant cementitious adhesive for ceramic tiles.

 

Pool FIX

Polymer modified water resistant adhesive for fixing swimming pools, fountains & watertanks tiles.

 

Pool GROUT

Water resistant grout for swimming pool tile joints.

 

Porcelain TILE FIX

Polymer modified weather resistant adhesive for porcelain tiles.

 

PREMIUM PROJECT FIX

High quality ceramic tile adhesive for projects.

 

view more
Featured Product
Vetocure XT425

Water based concrete curing compound

Uses
Retaining moisture in concrete after pouring
Allowing concrete to cure efficiently as required by concreting practice
General concrete curing application such as concrete slabs, retaining walls, runways, bridges, pavements, etc
Contact us
Choose a country
Saudi Vetonit Co. Ltd. (SAVETO)
P.O. Box 52235 Riyadh 11563, KSA
Toll: (+966 11) 265 3334
Fax: (+966 11) 265 0936
Sales
800 124 9009
Fax: (+966 11) 265 0718
Email: sales@saveto.com
Site Map