Primers and Ancillary
Vetonit PCJ

Saveto plaster accessories - plaster control joint 

 

Uses
Designed to deal with normal initial stucco shirinkage during the hydration and curing stage of cement stucco coats.
Controls plaster thermal expansion and contraction.
For walls and ceilings, and joints.
Fast Download
Technical Data Sheet
download (*.pdf 0.22Mb)
Technical Information
Product Description

Vetonit PCJ is a pre-galvanized steel control joint bead designed to minimize the plaster cracking and to allow movement in the plaster. Vetonit PCJ overcomes movement tolerances in plaster expansion, control joints, and offers positive locking of the stucco at the edge of the joint. Vetonit PCJ deals with the normal initial plaster shrinkage during curing and minor thermal expansion and contraction.

 

Advantages
  • Easy to apply.
  • High impact resistance.
  • Overcomes movement tolerances in plaster expansion
Compiliance Standard

ACI: 524R-08 (Building Code Requirements for Masonry Structures).

 

Packaging & Coverage

Vetonit PCJ

Wing (mm)

Length (m) 

QTY/Box

Vetonit PCJ103

10

3

50

Vetonit PCJ133

13

3

50

Vetonit PCJ163

16

3

50

Vetonit PCJ193

19

3

50

Application Information
Instructions for use

Application

Fix Vetonit PCJ by using Premix Plaster S, Vetonit Render, or any suitable mechanical fixing at a maximum center spaces of 600mm.

Vetonit PCJ may be wire tied to the face of metal lathing backgrounds. Use tinsnips or shears to cut angle beads to the desired size.

When jointing control joint beads use a dowel inserted in the nose to ensure continuity and alignment.

To get a sharp neat corner finish, avoid damaging the  beads when troweling plaster or render.

Additional Information
Important note

Saveto endeavors to ensure that any advice, recommendations, information it may give, is accurate and correct. It cannot accept any liability either directly or indirectly arising from the use of its products, because it has no direct or continuous control over where or how its products are applied, whether or not in accordance with any advice, specification, recommendation or information given by us. Saveto has the right to change any of the specifications mentioned in the Technical data sheets upon its discretion without prior notification.

Hard copies of TDSs are printed once or twice a year, while our technical data sheets are continuously being updated as per R&D improvements and new 3rd party testing; kindly refer to our website for the latest updated TDSs.

More Products from this section
Ready Mix Bond

Multi-purpose bonding agent & admixture

Saveto Bond 2

Multipurpose low viscosity bonding agent & admixture

Saveto PP Fiber

High Quality Monofilament Polypropylene Fibers

Vetobond PB436

Polymeric soil stabilizer

Vetobond PB434

Polymeric bonding agent, waterproof mix enhancer & primer

view more
Featured Product
Vetoset EA454

Water cleanable, chemical resistant waterproof epoxy tile adhesive

Uses
Laying virtually all types of tiles to cementitious and metal substrates
Chemical processing plants
Industrial Kitchens, food plants and hospitals
Swimming pools and aquariums
Contact us
Choose a country
Saudi Vetonit Co. Ltd. (SAVETO)
P.O. Box 52235 Riyadh 11563, KSA
Toll: (+966 11) 265 3334
Fax: (+966 11) 265 0936
Sales
800 124 9009
Fax: (+966 11) 265 0718
Email: sales@saveto.com
Site Map