Chemical resistant waterproof epoxy tile adhesive
Vetoset EA454 is a three component epoxy based chemical resistant and waterproof tile adhesive to be used with most types of tiles including ceramic, porcelain, glass mosaic, marble, granite,...etc. The product is composed of 3 components consisting of resin base, hardener and selected fillers.
Vetoset EA454 supplied in 8 Kg kit, Yield:4 Liters
Original sealed container of Vetoset EA454 has a shelf life of 12 months provided it is stored clear of ground in a dry shaded place below 25ºC.
To ensure proper mixing, a mechanically powered mixer or heavy duty slow speed drill fi tted with a suitable paddle should be used. Stir the base and the hardener individually to disperse any settlement. The entire contents of the base and hardener should be poured into a suitable size container and mixed mechanically for 2 minutes. Add the fi ller and mix for another 3 minutes, until a uniform color is achieved.
Apply a thin layer of the adhesive onto the substrate using the fl at edge of the trowel.Comb the adhesive with a suitable notched trowel horizontally to achieve a bed thickness of 2 - 5 mm. Place the tiles with firm pressure to ensure proper contact with the adhesive. It is always better to work in a manageable area that
can be tiled within the open time of the adhesive. Leave the tiled surfaces for 24 hours before grouting.
Tools and equipment can be cleaned with water immediately after use. Hardened materials will require removal by mechanical means.
Substrate should be sound, clean, free from loose material, grease, laitance, dirt, curing compound, or any other substance that might impair the quality of bond with the substrate.
Vetoset EA454 should not come into contact with skin and eyes or be swallowed. Ensure adequate ventilation and avoid inhalation of vapors. Some people are sensitive to resins, hardeners and solvents. Wear suitable protective clothing, gloves, and eye protection. If working in confi ned areas, suitable respiratory protective equipment must be used. The use of barrier creams provide additional skin protection. In case of contact with skin, rinse with plenty of clean water, then cleanse with soap and water. Do not use solvent. In case of contact with eyes, rinse immediately with plenty of clean water and seek medial advice. If swallowed, seek medical attention immediately - Do not induce vomiting. Vetoset EA454 is non-fl ammable.
Saveto endeavors to ensure that any advice, recommendations, information it may give, is accurate and correct. It cannot accept any liability either directly or indirectly arising from the use of its products, because it has no direct or continuous control over where or how its products are applied, whether or not in accordance with any advice, specification, recommendation or information given by us. Saveto has the right to change any of the specifications mentioned in the Technical data sheets upon its discretion without prior notification.
Hard copies of TDSs are printed once or twice a year, while our technical data sheets are continuously being updated as per R&D improvements and new 3rd party testing; kindly refer to our website for the latest updated TDSs.
Weather resistant cementitious adhesive for ceramic tiles
Polymer modified water resistant adhesive for fixing pool tiles
Water resistant grout for swimming pool tile joints
Polymer modified weather resistant adhesive for porcelain tiles
Weather resistant high quality tile adhesive for projects
Water based surface retarder for concrete