High strength decorative epoxy floor and wall coating
Vetotop ED910 is part of Saveto’s decorative epoxies product range that contains top of the line products that has a decorative as well as a protective function. Vetotop ED910 is a two component 100% solids epoxy based coating that is applied at a thickness of 500 microns with the possible use of floor chips and other application techniques to provide a large variety of decorative effects. The product has excellent physical properties that makes it abrasion and chemical resistant while being waterproof.
BS EN476:2009 as class 1 in flame spread.
Vetotop ED910 supplied in 15 Liter Kit. Yield - 15 m²/kit @ 1mm thickness
Vetoprime EP491 supplied in 4 Liter Kits. Yield - 7-10 m2/ Liter.
Original sealed bag of Vetotop ED901 has a shelf life of 12 months provided it is stored clear of ground in a dry and shaded place below 35ºC.
Vetotop ED910 is designed to be a hard wearing two coat application on cementitious or metal substrates. When used on metal substrates, use Vetoprime EP290 which contains corrosion inhibitors. The applied product will be resistant to water as well as a wide range of chemicals.
The substrate is to be primed by Vetoprime EP491prior to the application of Vetotop ED910. Vetoprime EP491 should be mixed in the proportions supplied. Add the entire contents of the hardener can to the base can. When thoroughly mixed, preferably using a slow speed mixer, the primer should be applied in a thin, continuous film using rollers or stiff brushes. Work the primer well into the surface of the concrete taking care to avoid ponding or over application. The primer should be left to achieve a tack-free condition before applying the top coat.
Since decorative finish is highly dependant on workmanship, Vetotop ED910 is to be mixed and applied by professional certified applicators. Please contact saveto local representative for recomendation on certified applicator for the decorative range.
The surface should be sound, clean, free from loose material, grease, laitence, dirt curing compound, etc. Laitence and weak surface layer shall be removed using mechanical methods such as grinding or blasting in order to provide a sound well profiled surface. All necessary repairs should be made prior to application by using epoxy mortar from Vetorep ER range.
New concrete floors shall be at least 28 days old with moisture content of less than 5% (shall earlier application be required testing of substrate for moisture conditions shall be made).
Vetotop ED910 and Vetoprime EP491 should not come into contact with skin and eyes or be swallowed. Ensure adequate ventilation and avoid inhalation of vapors. Some people are sensitive to resins, hardeners and solvents. Wear suitable protective clothing, gloves, and eye protection. If working in confined areas, suitable respiratory protective equipment must be used.
Saveto endeavors to ensure that any advice, recommendations, information it may give, is accurate and correct. It cannot accept any liability either directly or indirectly arising from the use of its products, because it has no direct or continuous control over where or how its products are applied, whether or not in accordance with any advice, specification, recommendation or information given by us. Saveto has the right to change any of the specifications mentioned in the Technical data sheets upon its discretion without prior notification.
Hard copies of TDSs are printed once or twice a year, while our technical data sheets are continuously being updated as per R&D improvements and new 3rd party testing; kindly refer to our website for the latest updated TDSs.
Premixed 2 to 10 mm thick cementitious self leveling underlayment
Premixed 10 to 30 mm thick cementitious screed.
Premixed 30 to 100 mm thick cementitious screed.
Chemical & abrasion resistant anti bacterial wall & floor thin epoxy coating
Solvent based high performance, self priming, thin epoxy topping
High performance, aromatic & flexible waterproof polyurethane flooring membrane